Product Overview
The SOLARY B3ST three cassette paint dryer with temperature control combines three 1050W emitters with staged timing, ultrasonic distance sensing and a temperature-control interface. Its 1.0 × 0.8 m catalog baking area suits selected automotive repair zones, while the articulated arm and adjustable cassette layout help align heat with the panel. B3ST is the most fully instrumented configuration among the cataloged B3, B3S and B3ST models.
Key Benefits
- Three 1050W emitters — A combined 3150W emitter specification supplies localized heat for the chosen repair zone.
- Staged treatment — Separate pre-heating and full-baking timers help the operator apply a compatible coating schedule.
- Cassette selection — Individual cassette keys are illustrated for arranging emitter use to match the task.
- Articulated positioning — The catalog shows cassette rotation and an adjustable support arm for surface alignment; engage the caster brakes before treatment.
- Distance and temperature functions — B3ST adds the ultrasonic distance sensor and temperature controller for a more instrumented setup.
Applications
Use the B3 configuration for localized refinishing of compatible automotive coatings on repaired panels. Suitable coating groups may include putty, primer, color coat and clear coat when infrared curing is permitted by the product technical data sheet. The catalog’s generic timing comparisons are not universal recipes and should not replace coating-specific instructions.
Controls and Positioning
The B3-family panel illustrates timing display, memory, cassette keys, separate pre-heating/full-baking settings and start/pause controls. The drawing shows 180° movement at individual cassettes, 90° assembly reorientation and 4-inch braked casters. B3ST also illustrates temperature display and preset controls, Celsius/Fahrenheit display keys and a temperature sensor with a red laser aiming aid. The laser is an aiming reference, not a separate stated curing-power source.
Technical Specifications
| Specification | Value |
|---|---|
| Brand / Model | SOLARY / B3ST |
| Input voltage | 230V |
| Emitter power | 3 × 1050W (3150W total) |
| Timing range | 2 × 35 min |
| Catalog baking area | 1.0 × 0.8 m |
| Catalog temperature range | 40–100°C |
| Catalog dimensions | 151 × 90 × 30 cm |
| Catalog weight | 49 kg |
| Control / sensor configuration | Ultrasonic distance sensor and temperature controller; pre-heating and full baking |
Model Selection
Compare B3 for standard staged timing, B3S for ultrasonic distance sensing, or B3ST for distance sensing plus the temperature controller. Compare B3DA for a 60-minute digital timer and adjustable-power controls.
Setup and Coating Compatibility
Before operation, confirm the supplied voltage version and the equipment manual, identify the coating product and its technical data sheet, and check the required flash-off period. Position the cassette at the approved distance and angle, secure the unit, then set the available timer/heating controls for the specified coating schedule. Check surface conditions with the measurement method required by the coating supplier; do not use the catalog comparison chart as a universal recipe.
FAQ
What is the total emitter power?
Three 1050W emitters give a combined specification of 3150W.
What timing system is listed?
The table gives 2 × 35 min, with pre-heating and full-baking settings shown separately. Set the actual schedule from the coating data sheet.
What sensor package does this model include?
Ultrasonic distance sensor and temperature controller; pre-heating and full baking. Features should be checked against the ordered model, not inferred from another variant.
How large is the listed baking area?
1.0 × 0.8 m. Coverage depends on working distance, alignment and surface geometry.
Does it work with every clear coat?
Use only coatings whose supplier permits infrared treatment, following the specified temperature, flash-off, distance and curing schedule.
What should a workshop buyer confirm?
230V supply compatibility, circuit requirements, placement space, emitter/spare availability and the model manual.
Manufacturing and Supply
SOLARY manufactures automotive repair equipment for body shops, equipment distributors and importers. Its company profile describes 26 years of experience, a 10,000 m² facility and OEM/ODM capabilities. Request model-specific documents, spare parts and order configuration when sourcing this curing equipment.
Request a Quote
For a workshop or wholesale quotation, send B3ST quantity, destination, available electrical supply, typical repair size and coating application. Request a SOLARY quotation or explore Paint Curing Lamps.
Reviews
There are no reviews yet.