Product Overview
The SOLARY IR8ST 12000W temperature controlled infrared paint dryer combines two infrared cassette assemblies with ultrasonic distance sensing and a temperature controller. A 2.2 × 1.5 m catalog baking area supports treatment of larger selected repair zones, while an articulated self-balancing arm positions the heads relative to the vehicle. This 400V three-phase model is the fully instrumented IR8 configuration for workshops comparing broad coverage with working-distance and temperature-control functions.
Key Benefits
- 12000W documented output — Match emitter power and 400V, 3PH supply requirements to the repair workflow and workshop installation.
- 2.2 × 1.5 m catalog baking area — Plan a wider treatment zone with the dual-head layout; usable heat distribution depends on setup.
- Cassette A/B selection — Illustrated controls allow the operator to configure cassette operation and single-tube use for the selected treatment.
- Articulated dual-head positioning — The self-balancing arm brings the cassette assemblies to different panel positions; secure the braked base before treatment.
- Distance and temperature instrumentation — Ultrasonic distance sensing and the ST temperature controller add documented setup and control functions.
Applications
Use this dual-head infrared system for localized refinishing of compatible automotive putties, primers, color coats and clear coats. Position both assemblies to match the repair geometry and use the coating supplier’s approved infrared schedule. It is a targeted repair-area dryer; the catalog area is not a whole-vehicle booth capacity.
Controls and Workflow
The illustrated IR6/IR8 panel provides only-one-tube operation, cassette A/B selection, timer display and memory, separate pre-heating/full-baking settings, and start/pause controls. The IR family also shows cassette fans, reflectors, self-balancing arms and 4-inch braked casters. The ST interface adds temperature display and preset controls with Celsius/Fahrenheit selection. The catalog confirms ultrasonic distance sensing and a temperature controller, but does not state sensor accuracy, measuring range or guaranteed panel temperature.
Technical Specifications
| Specification | Value |
|---|---|
| Brand / Model | SOLARY / IR8ST |
| Input voltage | 400V, 3PH |
| Emitter power | 12000W |
| Timing range | 2 × 35 min |
| Catalog baking area | 2.2 × 1.5 m |
| Catalog temperature range | 40–100°C |
| Catalog dimensions | 195 × 121 × 42.5 cm |
| Catalog weight | 70 kg |
| Control / sensor configuration | Ultrasonic distance sensor and temperature controller; staged timing |
Model Selection
Choose IR8 for standard timed operation, IR8S for ultrasonic distance sensing, or IR8ST for distance sensing plus a temperature controller. Compare IR6 for a different power, coverage and supply requirement. IR6 is 6000W at 230V single phase; IR8 is 12000W at 400V three phase.
Setup and Coating Compatibility
Confirm the electrical supply and equipment manual, identify the coating and its required flash-off period, then set the approved working distance, head angle and available timer/control settings. Secure the mobile base and verify surface conditions using the measurement method required by the coating supplier. Catalog time comparisons and the 40–100°C range are not universal coating recipes.
FAQ
What emitter power and baking area are specified?
IR8ST is listed at 12000W with a 2.2 × 1.5 m baking area. Distance, alignment and panel geometry affect the actual heating pattern.
What electrical supply is required?
The catalog specifies 400V, 3PH. Confirm the nameplate, circuit capacity, connection and installation requirements before commissioning.
Can the two cassette assemblies be selected separately?
The IR6/IR8 panel illustrates cassette A and B selection and only-one-tube operation. Follow the model manual for the permitted combinations.
Which sensor features are included?
Ultrasonic distance sensor and temperature controller; staged timing. Confirm the exact order configuration rather than assigning another suffix’s equipment to this model.
What does 2 × 35 min mean?
The table lists two timed stages associated with pre-heating and full baking. It does not mean every coating requires a 70-minute treatment.
How should a body shop select IR6 versus IR8?
Compare the repair zone, required output, available electrical supply and operator controls. IR8 has the larger catalog area and requires 400V three-phase supply; IR6 specifies 230V single phase.
Manufacturing and Supply
SOLARY manufactures automotive repair equipment for body shops, refinish workshops, distributors and importers. Its company profile describes 26 years of experience, a 10,000 m² production facility and OEM/ODM capabilities. Request model-specific documents, spare-part options and the final supply configuration for your market.
Request a Quote
Send IR8ST quantity, destination, available electrical supply and intended repair area and coating application. Request a SOLARY quotation or browse Paint Curing Lamps.
Reviews
There are no reviews yet.