Product Overview
The SOLARY PD302 automotive paint sample dryer treats sprayed color samples before they are compared with the vehicle finish. During refinishing, a spray-out sample helps a technician assess the mixed color before committing to the repair. PD302 is a compact sample-treatment unit with a 300W emitter specification, a 30-minute timer and a 35–90°C catalog temperature range. It also requires 3–8 bar input air, a key utility requirement to confirm when equipping a paint-mixing or refinishing workstation.
Key Benefits
- Dedicated sample workflow — Dry a sprayed sample for evaluation before proceeding with the vehicle repair, using the coating supplier’s approved sample process.
- Compact 300W specification — Select equipment designed for paint samples rather than assigning the coverage of a body-panel infrared lamp to this unit.
- 30-minute timed operation — A defined timer range supports an operator-selected treatment cycle; required drying time depends on the sample coating.
- 35–90°C catalog range — Plan an appropriate sample treatment and confirm the controls and settings in the manual.
- Air-supply requirement stated — A 3–8 bar input-air specification helps workshops assess compressed-air compatibility before procurement.
Applications
Use PD302 for compatible automotive paint spray-out samples in paint-mixing, refinish preparation and color-verification workflows. Compare the treated sample using an appropriate lighting and evaluation procedure. This dryer treats the sample; it does not measure color differences or guarantee an exact match. It is not represented as a full-panel infrared curing lamp.
Controls and Workflow
The product illustration shows front-panel adjustment controls and a sample working opening. The technical table specifies a 30-minute timer, 300W emitter power, 3–8 bar input air and a 35–90°C temperature range. The page lists paint sample film/cards and a holding clip as standard accessories; confirm quantities and the final packing list. The SG02 spray-gun color-matching light on the same catalog page is a separate product and is not assumed included with PD302.
Technical Specifications
| Specification | Value |
|---|---|
| Brand / Model | SOLARY / PD302 |
| Input voltage options | 110V / 230V |
| Emitter power | 300W |
| Timing range | 30 min |
| Input air pressure | 3–8 bar |
| Catalog temperature range | 35–90°C |
| Catalog dimensions | 38 × 28 × 42.8 cm |
| Catalog weight | 7.7 kg |
| Illustrated standard accessories | Paint sample film/cards; sample holding clip |
Model Selection
Choose PD302 for the sample-drying stage of color verification. Compare B1M11 for compact repair-zone infrared curing or IR3 for larger body-panel treatment. These products serve different sample and panel workflows; their power and coverage should not be treated as interchangeable.
Setup and Coating Compatibility
Confirm the ordered 110V or 230V version, the supplied manual and a compatible regulated air supply meeting the 3–8 bar input specification. Prepare the spray-out sample using the paint system’s technical data sheet, allow the required flash-off, and select the approved drying schedule. Handle and compare the sample according to the coating procedure after treatment. Exact timing, sample-size limits and connection details must come from the model manual.
FAQ
What is PD302 used for?
Drying sprayed automotive paint samples for subsequent color comparison during refinish preparation.
Does it require compressed air?
Yes. The catalog specifies 3–8 bar input air. Confirm the connection, air quality and regulation requirements in the manual.
What power and temperature range are listed?
300W emitter power and a 35–90°C catalog temperature range.
What is the timer limit?
30 minutes. The actual sample schedule depends on the paint system and coating supplier’s instructions.
Is the SG02 spray-gun light included?
SG02 is a separate product on the same page. It is not established as part of the PD302 supply list.
Does the machine guarantee an exact color match?
No. It dries the sample. Matching depends on the paint formulation, application, substrate, treatment and viewing conditions.
Manufacturing and Supply
SOLARY manufactures automotive repair equipment for body shops, refinish workshops, distributors and importers. Its company profile describes 26 years of experience, a 10,000 m² production facility and OEM/ODM capabilities. Request model-specific documents, spare-part options and the final supply configuration for your market.
Request a Quote
Send PD302 quantity, destination, available electrical supply and intended sample-treatment workflow; include compressed-air details. Request a SOLARY quotation or browse Paint Curing Lamps.
Reviews
There are no reviews yet.