See More. Work Conveniently.
Bring fluid visibility, pressure monitoring and selectable flow into your workshop with the SOLARY SD607 smoke leak detector. Its transparent oil window, pointer-style gauge and metal-button controls make everyday preparation more convenient. Choose a compact hanging model with four flow levels and both round and cone plug sets included.
Input voltage: DC12V. Power: 65W. Operating mode: Air&smoke mode.
Built for Daily Use
- Four selectable flow settings: choose 2/4/6/8 L/min for convenient output control.
- Pressure observation: keep test pressure visible while inspecting the connected circuit.
- Visible oil level: check remaining test fluid directly through the observation window.
- Built-in air pump: no external air compressor required for the machine’s air supply.
- Compact hanging design: position the tester using the supplied hook.
Keep Oil and Pressure Visible
Check remaining fluid through the oil-level window and follow test pressure on the pointer gauge. Use the metal buttons to select 2/4/6/8 L/min in either air or smoke mode. The supplied hook helps position this well-equipped 60-series model within easy reach of the test area.
Check Fluid Easily
Keep the remaining oil visible before each inspection. The oil-level window lets you check fluid directly, helping make equipment preparation more convenient between jobs. Observe the pressure gauge separately during the test.
Less Cleanup. More Convenience.
Easy-to-wipe metal buttons help reduce oil and grime buildup around the controls. Hang the compact body from the supplied hook to keep it conveniently positioned near the inspection area. Built-in overheat protection stops the entire machine if overheating occurs and automatically resumes operation after cooling.
Trace Hidden Leaks
Use SD607 for intake leak testing, vacuum leak inspection and compatible vehicle pipework checks under the applicable service procedure. Visible smoke helps direct attention to unintended openings around hoses, fittings and seals, supporting a more focused inspection before repair decisions. For EVAP leak testing and other pressure-sensitive circuits, confirm the required setup and permitted test pressure. The 18-23psi catalog output-pressure value is not a universal vehicle test setting.
Technical Specifications
| Model | SD607 |
|---|---|
| Input Voltage | DC12V |
| Power | 65W |
| Output Pressure | 18-23psi |
| Air Supply | Built-in Air Pump |
| Operating Mode | Air&smoke mode |
| Output Flow | 2/4/6/8 L/min |
| Pressure Display | Pressure gauge |
| Flow Meter | Not included |
| Oil-Level Window | Included |
| Test Oil Max Capacity | 30ml |
| Product Size | 137X200X193mm |
| Package Size | 250X230X220mm |
| Gross Weight | 3.55kg |
| Standard Accessories | A+B+C+D |
Standard Accessories
| Power cord | 1 set |
|---|---|
| Pipe | 1 pc |
| Cone adapter set | 1 pc |
| Pipe adapter | 1 pc |
| Refueling bottle | 1 set |
| Hook | 1 set |
| Valve core wrench | 1 set |
| EVAP adapter | 1 pc |
| Inlet port adapter | 1 set |
| Round plug set | 1 set |
| Cone plug set | 1 set |
Prepare for the Next Test
Use recommended baby oil (BB oil): 20ml for first use, then refill with 30ml only after the previous oil has been used up. Do not exceed the 30ml maximum capacity. Smoke normally begins in approximately 10 seconds after activation; this is startup time, not a promised diagnosis time. Follow the model instructions for preparation, DC12V input connection and operation.
Buyer Questions
Why choose SD607 for my workshop?
Check remaining fluid through the oil-level window and follow test pressure on the pointer gauge. Use the metal buttons to select 2/4/6/8 L/min in either air or smoke mode. The supplied hook helps position this well-equipped 60-series model within easy reach of the test area.
What input voltage does SD607 require?
The specified input voltage is DC12V, with a power rating of 65W.
Which modes and flow settings are available?
Air&smoke mode. Select 2/4/6/8 L/min in air and smoke modes. These are selected output settings, not readings from an independent flowmeter.
How can I monitor pressure and oil?
A pressure gauge displays test pressure. The transparent window shows remaining test oil.
What is the packaged weight?
SD607 has a catalog gross weight of 3.55kg. This is the gross weight, not the machine’s net weight.
What happens if the machine overheats?
Overheat protection stops the entire machine. Operation automatically resumes after cooling. The operator must still monitor the test.
How do I request a wholesale or OEM quote?
Send the model SD607, required quantity, destination country and logo or packaging requirements. SOLARY will confirm available options, pricing, package contents and estimated dispatch time.
Find Your Workshop Fit
Compare SD606 Smoke Detector with Pressure Gauge and SD507 Digital Tester with Oil Window, or explore our automotive smoke leak detectors to choose the configuration that fits your requirements.
Factory Support for Your Order
Buying for a workshop, distribution business or equipment brand? SOLARY welcomes enquiries from automotive equipment distributors, wholesalers and importers. Explore our manufacturing and OEM/ODM services and confirm available branding and packaging options for your order.
Request Your SD607 Quote
Equip your workshop—or expand your diagnostic equipment range—with the SOLARY SD607. Share your required quantity, destination country, intended use and any logo or packaging requirements so we can prepare a quotation. Our team will confirm the configuration, package contents, pricing and estimated dispatch time.
RFQ details: Model SD607 · Quantity · Destination country · Workshop use or resale · Branding / packaging requirements
Technical reading: EPA background on vehicle evaporative emissions. This resource explains emissions background; it does not certify this product or specify its operating procedure.
Product Images
Reviews
There are no reviews yet.