Product Overview
The SOLARY IR4 6000W infrared paint dryer directs heat toward a selected repair area using an adjustable cassette and self-balancing arm. Its catalog baking area of 1.1 × 1.5 m is larger than the IR3 family’s 1.0 × 1.1 m area, providing a different coverage option for panel refinishing. Pre-heating and full-baking controls allow an operator to establish a staged schedule based on the coating supplier’s instructions.
Key Benefits
- 6000W localized output — Select the documented power level for the repair workflow and verify the workshop electrical supply before installation.
- 1.1 × 1.5 m catalog baking area — Plan the heated zone around the repair rather than assigning the same coverage to every infrared model.
- Separate curing stages — The 2 × 35 min timing specification supports pre-heating and full baking as distinct operator-controlled stages.
- Adjustable working position — The self-balancing arm and mobile base help bring the cassette to the vehicle surface; use the braked casters during stationary treatment.
- Standard timed-control configuration — Choose the base model when separate pre-heating and full-baking controls meet the workflow; sensor features belong to the S and ST versions.
Applications
Use this mobile infrared dryer for localized body-panel coating treatment, including compatible repair putties, primers, color coats and clear coats. Select the coating supplier’s approved infrared schedule and align the cassette with the repair geometry. Keep the area suitable for the coating process and follow the equipment manual for clearance, ventilation, electrical connection and operator precautions.
Controls and Positioning
The IR family uses short-wave infrared cassettes with cassette fans, reflectors, self-balancing arms and 4-inch braked casters shown in the catalog. The control panel illustrates timer display, memory and cassette selection keys, start and pause controls, and separate pre-heating/full-baking settings. The base version is documented for pre-heating and full baking; ultrasonic distance sensing and the ST temperature controller should not be assumed included.
Technical Specifications
| Specification | Value |
|---|---|
| Brand / Model | SOLARY / IR4 |
| Input voltage | 230V, 1PH |
| Emitter power | 6000W |
| Timing range | 2 × 35 min |
| Catalog baking area | 1.1 × 1.5 m |
| Catalog temperature range | 40–100°C |
| Catalog dimensions | 146 × 93.5 × 33.5 cm |
| Catalog weight | 60.5 kg |
| Control / sensor configuration | Pre-heating and full baking |
Model Selection
Within the IR4 family, IR4 is the standard timed version, IR4S adds ultrasonic distance sensing, and IR4ST adds the temperature controller. Compare IR3 for a different power and coverage specification. Base selection should match repair size, supply and operator-control requirements.
Setup and Coating Compatibility
Before operation, confirm the supplied voltage version and the equipment manual, identify the coating product and its technical data sheet, and check the required flash-off period. Position the cassette at the approved distance and angle, secure the unit, then set the available timer/heating controls for the specified coating schedule. Check surface conditions with the measurement method required by the coating supplier; do not use the catalog comparison chart as a universal recipe.
FAQ
What output and coverage are specified?
IR4 is listed at 6000W with a 1.1 × 1.5 m baking area. Actual coverage and heat distribution depend on distance, angle and the component.
What electrical supply is required?
The catalog specifies 230V, 1PH. Confirm the nameplate, local supply, circuit capacity and installation requirements before use.
How are curing stages timed?
The table lists 2 × 35 min, with separate pre-heating and full-baking controls. The timing limit is not a recommended curing duration for every paint.
Which sensor features are included?
Pre-heating and full baking. Check the ordered configuration and model manual; do not assume features from another suffix.
Does the 40–100°C specification guarantee a panel temperature?
No. This is the catalog temperature range. Surface temperature and curing results depend on coating, substrate, distance, angle and settings. Follow the coating technical data sheet.
What information is needed for a distributor quotation?
Send model, quantity, destination, electrical supply and intended coating/repair application. Ask for the manual, spare-emitter options and the final packing list.
Manufacturing and Supply
SOLARY manufactures automotive repair equipment for body shops, equipment distributors and importers. Its company profile describes 26 years of experience, a 10,000 m² facility and OEM/ODM capabilities. Request model-specific documents, spare parts and order configuration when sourcing this curing equipment.
Request a Quote
For a workshop or wholesale quotation, send IR4 quantity, destination, available electrical supply, typical repair size and coating application. Request a SOLARY quotation or explore Paint Curing Lamps.
Reviews
There are no reviews yet.