SOLARY IR6 6000W Dual-Head Infrared Paint Curing Lamp

Product Overview

The SOLARY IR6 6000W dual head infrared paint curing lamp combines two cassette assemblies for localized automotive refinishing over a 2.0 × 1.1 m catalog baking area. Its standard panel provides staged pre-heating/full-baking timing and cassette-selection controls, while a self-balancing arm helps position the assemblies beside the vehicle. IR6 is the base dual-head option for buyers who require wider coverage and 230V single-phase supply without the S/ST sensor configuration.

Key Benefits

• 6000W documented output — Match emitter power and 230V, 1PH supply requirements to the repair workflow and workshop installation.
• 2.0 × 1.1 m catalog baking area — Plan a wider treatment zone with the dual-head layout; usable heat distribution depends on setup.
• Cassette A/B selection — Illustrated controls allow the operator to configure cassette operation and single-tube use for the selected treatment.
• Articulated dual-head positioning — The self-balancing arm brings the cassette assemblies to different panel positions; secure the braked base before treatment.
• Separate pre-heating and full baking — A 2 × 35 min timer specification supports staged treatment without requiring the S/ST sensor package.

Applications

Use this dual-head infrared system for localized refinishing of compatible automotive putties, primers, color coats and clear coats. Position both assemblies to match the repair geometry and use the coating supplier’s approved infrared schedule. It is a targeted repair-area dryer; the catalog area is not a whole-vehicle booth capacity.

Controls and Workflow

The illustrated IR6/IR8 panel provides only-one-tube operation, cassette A/B selection, timer display and memory, separate pre-heating/full-baking settings, and start/pause controls. The IR family also shows cassette fans, reflectors, self-balancing arms and 4-inch braked casters. The base model is documented for pre-heating and full baking. Ultrasonic distance sensing and temperature control are features of the S and ST configurations rather than confirmed equipment on the base version.

Technical Specifications

Specification	Value
Brand / Model	SOLARY / IR6
Input voltage	230V, 1PH
Emitter power	6000W
Timing range	2 × 35 min
Catalog baking area	2.0 × 1.1 m
Catalog temperature range	40–100°C
Catalog dimensions	158 × 98 × 35.5 cm
Catalog weight	68 kg
Control / sensor configuration	Standard pre-heating and full-baking controls

Model Selection

Choose IR6 for standard timed operation, IR6S for ultrasonic distance sensing, or IR6ST for distance sensing plus a temperature controller. Compare IR8 for a different power, coverage and supply requirement. IR6 is 6000W at 230V single phase; IR8 is 12000W at 400V three phase.

Setup and Coating Compatibility

Confirm the electrical supply and equipment manual, identify the coating and its required flash-off period, then set the approved working distance, head angle and available timer/control settings. Secure the mobile base and verify surface conditions using the measurement method required by the coating supplier. Catalog time comparisons and the 40–100°C range are not universal coating recipes.

FAQ

What emitter power and baking area are specified?

IR6 is listed at 6000W with a 2.0 × 1.1 m baking area. Distance, alignment and panel geometry affect the actual heating pattern.

What electrical supply is required?

The catalog specifies 230V, 1PH. Confirm the nameplate, circuit capacity, connection and installation requirements before commissioning.

Can the two cassette assemblies be selected separately?

The IR6/IR8 panel illustrates cassette A and B selection and only-one-tube operation. Follow the model manual for the permitted combinations.

Which sensor features are included?

Standard pre-heating and full-baking controls. Confirm the exact order configuration rather than assigning another suffix’s equipment to this model.

What does 2 × 35 min mean?

The table lists two timed stages associated with pre-heating and full baking. It does not mean every coating requires a 70-minute treatment.

How should a body shop select IR6 versus IR8?

Compare the repair zone, required output, available electrical supply and operator controls. IR8 has the larger catalog area and requires 400V three-phase supply; IR6 specifies 230V single phase.

Manufacturing and Supply

SOLARY manufactures automotive repair equipment for body shops, refinish workshops, distributors and importers. Its company profile describes 26 years of experience, a 10,000 m² production facility and OEM/ODM capabilities. Request model-specific documents, spare-part options and the final supply configuration for your market.

Request a Quote

Send IR6 quantity, destination, available electrical supply and intended repair area and coating application. Request a SOLARY quotation or browse Paint Curing Lamps.