Product Overview
The SOLARY IR3S infrared paint dryer with distance sensor pairs 3000W output with ultrasonic sensing for working-distance setup. A 1.0 × 1.1 m catalog baking area serves localized panel refinishing, while an articulated arm and staged timers help the operator position the cassette and manage pre-heating separately from full baking. IR3S adds distance sensing to the standard IR3 specification; it does not include the cataloged ST temperature-controller package.
Key Benefits
- 3000W localized output — Select the documented power level for the repair workflow and verify the workshop electrical supply before installation.
- 1.0 × 1.1 m catalog baking area — Plan the heated zone around the repair rather than assigning the same coverage to every infrared model.
- Separate curing stages — The 2 × 35 min timing specification supports pre-heating and full baking as distinct operator-controlled stages.
- Adjustable working position — The self-balancing arm and mobile base help bring the cassette to the vehicle surface; use the braked casters during stationary treatment.
- Ultrasonic positioning assistance — The distance sensor provides an additional setup reference for the cassette-to-surface spacing; confirm the approved working distance in the manual.
Applications
Use this mobile infrared dryer for localized body-panel coating treatment, including compatible repair putties, primers, color coats and clear coats. Select the coating supplier’s approved infrared schedule and align the cassette with the repair geometry. Keep the area suitable for the coating process and follow the equipment manual for clearance, ventilation, electrical connection and operator precautions.
Controls and Positioning
The IR family uses short-wave infrared cassettes with cassette fans, reflectors, self-balancing arms and 4-inch braked casters shown in the catalog. The control panel illustrates timer display, memory and cassette selection keys, start and pause controls, and separate pre-heating/full-baking settings. The S version adds an ultrasonic distance sensor.
Technical Specifications
| Specification | Value |
|---|---|
| Brand / Model | SOLARY / IR3S |
| Input voltage | 230V, 1PH |
| Emitter power | 3000W |
| Timing range | 2 × 35 min |
| Catalog baking area | 1.0 × 1.1 m |
| Catalog temperature range | 40–100°C |
| Catalog dimensions | 120 × 55 × 24.3 cm |
| Catalog weight | 61 kg |
| Control / sensor configuration | Pre-heating and full baking; ultrasonic distance sensor |
Model Selection
Within the IR3 family, IR3 is the standard timed version, IR3S adds ultrasonic distance sensing, and IR3ST adds the temperature controller. Compare IR4 for a different power and coverage specification. Base selection should match repair size, supply and operator-control requirements.
Setup and Coating Compatibility
Before operation, confirm the supplied voltage version and the equipment manual, identify the coating product and its technical data sheet, and check the required flash-off period. Position the cassette at the approved distance and angle, secure the unit, then set the available timer/heating controls for the specified coating schedule. Check surface conditions with the measurement method required by the coating supplier; do not use the catalog comparison chart as a universal recipe.
FAQ
What output and coverage are specified?
IR3S is listed at 3000W with a 1.0 × 1.1 m baking area. Actual coverage and heat distribution depend on distance, angle and the component.
What electrical supply is required?
The catalog specifies 230V, 1PH. Confirm the nameplate, local supply, circuit capacity and installation requirements before use.
How are curing stages timed?
The table lists 2 × 35 min, with separate pre-heating and full-baking controls. The timing limit is not a recommended curing duration for every paint.
Which sensor features are included?
Pre-heating and full baking; ultrasonic distance sensor. Check the ordered configuration and model manual; do not assume features from another suffix.
Does the 40–100°C specification guarantee a panel temperature?
No. This is the catalog temperature range. Surface temperature and curing results depend on coating, substrate, distance, angle and settings. Follow the coating technical data sheet.
What information is needed for a distributor quotation?
Send model, quantity, destination, electrical supply and intended coating/repair application. Ask for the manual, spare-emitter options and the final packing list.
Manufacturing and Supply
SOLARY manufactures automotive repair equipment for body shops, equipment distributors and importers. Its company profile describes 26 years of experience, a 10,000 m² facility and OEM/ODM capabilities. Request model-specific documents, spare parts and order configuration when sourcing this curing equipment.
Request a Quote
For a workshop or wholesale quotation, send IR3S quantity, destination, available electrical supply, typical repair size and coating application. Request a SOLARY quotation or explore Paint Curing Lamps.
Reviews
There are no reviews yet.